Activated Carbon Filter
Activated Carbon Filter(ACF) is a natural material derived from bituminous coal, lignite, wood, coconut shell etc., activated by steam and other means, and each one have different adsorption properties (e.g. bituminous carbon for high chlorine reduction capacity). We also use various blends of carbon to achieve specific water quality and contaminants reduction (e.g. coconut shell carbon for "sweet taste").
Rapid Gravity Sand Filters
The rapid gravity sand filter is a type of filter commonly used in municipal water treatment facilities. Rapid sand filters use relatively coarse sand and other granular media to remove particles and impurities that have been trapped in a floc through the use of flocculation chemicals - typically salts of aluminium or iron. Water and flocs flows through the filter medium under gravity pressure and the flocculated material are trapped in the sand matrix. Rapid filters are usually built open with the water passing down the filter but by gravity. It has a filter rate of 4 – 8 m3/m2/hr.
The tank is made of concrete with a depth of 3.0 to 3.5m. Coarse sand of size 0.4 to 1.5mm is used as the filter medium. Screen Filter A screen filter is a type of filter utilizing a rigid or flexible screen to separate sand and other fine particles out of water for irrigation or other applications. Typical screen materials include stainless steel (Mesh), polypropylene, and nylon. "Activated Carbon Filter ", also called activated charcoal or activated coal is a form of carbon that has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions.
The word activated in the name is sometimes replaced with active. Due to its high degree of microporosity, just 1 gram of activated carbon has a surface area in excess of 500 m2 (about one tenth the size of a football field), as determined typically by nitrogen gas adsorption. Sufficient activation for useful applications may come solely from the high surface area, though further chemical treatment often enhances the absorbing properties of the material. Activated carbon is usually derived from charcoal.
Carbon filtering is a method of filtering that uses a piece of activated carbon to remove contaminants and impurities, utilizing chemical adsorption. Each piece of carbon is designed to provide a large section of surface area, in order to allow contaminants the most possible exposure to the filter media. One pound (454g) of activated carbon contains a surface area of approximately 100 acres (1 km²/kg). This carbon is generally activated with a positive charge and is designed to attract negatively charged water contaminants.
Carbon filtering is commonly used for water purification, but is also used in air purifiers. Carbon filters are most effective at removing chlorine, sediment, and volatile organic compounds (VOCs) from water. They are not effective at removing minerals, salts, and dissolved inorganic compounds.
Typical particle sizes that can be removed by carbon filters range from 0.5 to 50 micrometres. The particle size will be used as part of the filter description. The efficacy of a carbon filter is also based upon the flow rate regulation. When the water is allowed to flow through the filter at a slower rate, the contaminants are exposed to the filter media for a longer amount of time.